Automotive Lubricants:

Sunoco Ultra SAE 10W-30

This is the high protection motor oil that exceeds the API "SL" standard for wear and deposit control.  It is the motor oil recommended for most cars, especially those with today's high revving engines.  Sunoco Ultra 10W-30 helps promote longer engine life in gasoline and turbo-charged engines.  Meets ILSAC GF-3 requirements.

Sunoco Ultra SAE 10W-40

Helps protect against engine wear and deposit build-up.  In fact, Sunoco 10W-40 exceeds the highest standards for wear and deposit control.  As an "SL" oil, it affords outstanding protection against viscosity and thermal breakdown.

Sunoco Ultra GT SAE 20W-50

High performance protection at its best.  This motor oil stays in grade even under sustained severe driving conditions.  It is excellent for super-charged, turbo-charged and naturally aspirated engines, giving optimum wear protection even under engine-straining racing conditions.

Sunoco Ultra SAE 5W-30

Compared to all our other oils, Ultra SAE 5W-30 provides the fastest start-up in cold weather, the highest fuel economy, the greatest horsepower and the best protection against stalling.  Formulated especially for today's high-revving engines and for longer engine life, this ultra oil exceeds the highest API standard for wear and deposit control.  Meets ILSAC GF-3 requirements.

Sunoco Ultra SAE 30 & 40

This is an outstanding single grade motor oil offering excellent wear and deposit control.  It also offers superb protection against sludge and varnish formation.

The SAE 40 is more of a viscous oil, providing extra heavy duty protection for higher temperature operation environments.

Sunoco Super C SAE 15W-40, SAE 30

This is the advanced diesel engine oil that offers an extra margin of protection.  Available in SAE 15W-40 and SAE 30, it meets the requirements of diesel and gasoline engines.  Rated at API CI-4, CH-4, CG-4, CF-4, CE, CD-II, CF, CF-2 / SL and  SH in gallons and quarts, Super C delivers exceptional protection against wear under severe operating conditions.

Sunoco 260 SAE 20W-50, SAE 10W-30

Here are two grades of partial synthetic motor oil specifically formulated for high performance engines.  The SAE 20W-50 grade has improved contaminant handling capability.  The SAE 10W-30 showed improvement in low temperature performance when tested against conventional oils.  Both exceed requirements for gasoline and diesel engines.

Sunoco Ford Type F ATF

This is the fluid recommended for use in all automatic transmissions and power steering units where Ford specification ESW-M2C33-F fluid is required.  It is a high quality product, promoting longer transmission life and providing powerful protection against deposit and wear.

Sunoco Ultra Gold

Here are the high-tech, customer-pleasing advantages of synthetic motor oil blended into the proven advantages of Sunoco's premium motor oil.  The result: A fast-flowing, heat fighting, engine protecting oil that has improved low temperature viscosity and improved volatility for reduced oil consumption.  An API SL oil, it is available in SAE 5W-30 and SAE 10W-30.  Both grades meet ILSAC GF-3 requirements.

Sunoco Ultra Prestige EP

This is the Sunoco premium quality grease.  It can be used over the widest range of automotive and industrial applications.  With outstanding high temperature characteristics (dropping point of more than 500°F) and extreme pressure capability, it pumps readily, resists water washout and provides excellent protection against wear and corrosion.  It is a truly versatile grease, which enables maximum protection, maximum performance and maximum service life on most equipment where No. 2 grade grease is specified.

Sunoco Multi-Purpose 2 EP

A high quality, multi-purpose lithium grease fortified with extreme pressure agents.  Pumps readily, resists water washout and gives excellent protection against rust and corrosion.

Sunoco Moly EP

Tough multi-purpose lithium EP grease strengthened with molybdenum disulfide.  Provides added protection against wear and corrosion and helps to prevent sliding or oscillating friction, galling and seizing.

Sunoco 2-Cycle Engine Oil TC-W3

Sunoco's specially formulated 2-cycle engine oil which lessens piston deposits and ring sticking and helps prevent rust and corrosion even while in seasonal storage.  Outstanding protection for virtually all 2-cycle engines: Outboard Motors, Lawnmowers, Weed Trimmers, Motorcycles, Chainsaws, All-Terrain Vehicles, and other 2-cycle equipment.
Can be used in oil injection systems or pre-mixed to 50:1 ratio and beyond.

Sunoco 4-Cycle Lawnmower Oil

Outstanding engine protection for all 4-cycle lawnmowers and 4-cycle garden equipment; specially formulated to protect against high engine heat.  Sunoco Lawnmower Oil contains all-important rust inhibitors and acid neutralizers to prevent rust and corrosion.

Sunoco Ultra GL-5, SAE 80W-90, SAE 85W-140

Sunoco Ultra Gear Oil are formulated to be exceptionally effective under extreme pressure.  They are thermally stable, resist oxidation and are equally effective in lubricating high stressed spiral-bevel or hypoid gear sets.  These technically advanced oils meet or exceed API GL-5 and MACK GO-H specifications.

Sunoco TH Tractor Fluid

This hydraulic fluid is ideal for every type of farm or industrial tractor, including those with wet clutches and wet breakes.  It is formulated with an outstanding reserve of anti-wear properties to protect the equipment and add to its service life.  This fluid meets the John Deere J-20C specification and is Allison C4 approved.  It is also one of the best values of its kind, consistently protecting your maintenance budget.